Defend Against DoS & DDoS on Apache With mod_evasive


The mod_evasive module is an Apache web services module that helps your server stay running in the event of an attack. A common type of cyber attack comes in the form of a Denial of Service (DoS), Distributed Denial of Service (DDoS), or brute-force attempting to overwhelm your security.

The nature of these attacks is to use several different computers to make repeated requests against your server. This causes the server to run out of processing power, memory, network bandwidth, and become unresponsive.

This guide will walk you through configuring and installing mod_evasive to protect against DoS and DDoS.

Apache mod_evasive guide.


  • The LAMP (Linux, Apache, MySQL, PHP) stack installed and configured
  • Access to a user account with sudo or root privileges
  • A functioning mail server (for email alerts)

How Does Apache mod_evasive Work

The mod_evasive Apache utility works by monitoring incoming server requests. The tool also watches for suspicious activity from one IP, such as:

  • Several requests for the same page in one second.
  • More than 50 simultaneous requests per second.
  • Requests made while the IP is temporarily blacklisted.

The module sends a 403 error if any of these things happen. By default, this also includes a 10-second waiting period on the blacklist. If the IP address making the request tries again in that 10-second window, the waiting time increases.

mod_evasive helps you defend against these kinds of attacks through network detection and management.

Note: Learn how to check for a DDoS attack on a Linux server.

Steps to Installing mod_evasive Apache Utility

Step 1: Install Apache Web Server Utility

Before installing the utility, update the package repository with the command for your Linux distribution:

Debian / Ubuntu:

sudo apt update

RedHat / CentOS:

sudo yum update

Allow the system to refresh and update your software listings.

Then, install a helper utility:

Debian / Ubuntu:

sudo apt install apache2-utils
Installing apache2-utils on Ubuntu

RedHat / CentOS:

sudo yum install httpd-devel

The final section of the output looks like this:

Installing httpd devel utility in CentOS

This utility is required for the installation of mod_evasive.

Step 2: Install mod_evasive

Debian / Ubuntu

To install the mod_evasive module on Debian / Ubuntu, enter the following:

sudo apt install libapache2-mod-evasive
Installing mod_evasive on Ubuntu

When you get a prompt, select Ok and choose your configuration.

Postfix Configuration in ubuntu when installing Apache mod_evasive

When unsure, select No configuration or Local only.

CentOS / RedHat

To install the mod_evasive module on RedHat / CentOS:

Add the EPEL repository:

sudo yum install epel-release
Add EPEL repository on CentOS

And then, enter:

sudo yum install mod_evasive

Allow the process to complete.

Step 3: Configure mod_evasive

Like most Linux software packages, mod_evasive is controlled by a configuration file. Make the following changes in the config file as the first step in preventing DDoS attacks:

1. Use a text editor of your choice with the following commands:

Debian / Ubuntu:

sudo nano /etc/apache2/mods-enabled/evasive.conf

RedHat / CentOS:

sudo nano /etc/httpd/conf.d/mod_evasive.conf

2. Find the following entry:

#DOSEmailNotify        [email protected]
Apache mod_evasive configuration file

Remove the # sign, then replace [email protected] with your actual email address. Use an email that you check regularly – this is where the tool will send alerts.

3. Remove the comment tag from the following entries, so the log file looks as follows:

DOSHashTableSize 3097

DOSPageCount 2

DOSSiteCount 50

DOSPageInterval 1

DOSSiteInterval 1

DOSBlockingPeriod 10

DOSEmailNotify [email protected]

DOSLogDir "/var/log/apache2/"

4. Save the file and exit. Reload the Apache service by entering the following:

Debian / Ubuntu:

sudo systemctl reload apache2

RedHat / CentOS:

sudo systemctl restart httpd.service

Test mod_evasive

Now, let’s verify the module is working correctly.

In this example, use the script to test mod_evasive.

The script is located at: /usr/share/doc/libapache2-mod-evasive/examples/

Use the following command to run the script:

perl /usr/share/doc/libapache2-mod-evasive/examples/

The output should return this message:

Perl script test for mod_evasive

Parameters and Settings

There are many mod_evasive parameters you can configure:

  • DOSSystemCommand: First, you may have noticed that this option was left disabled as a comment. This command allows you to specify a system command to be run when an IP address is added to the blacklist. You can use this to launch a command to add an IP address to a firewall or IP filter.
  • DOSHashTableSize: Increase this for busier web servers. This configuration allocates space for running the lookup operations. Increasing the size improves the speed at the cost of memory.
  • DOSPageCount: The number of requests for an individual page that triggers blacklisting. This is set to 2, which is low (and aggressive) – increase this value to reduce false-positives.
  • DOSSiteCount: The total number of requests for the same site by the same IP address. By default, this is set to 50. You can increase to 100 to reduce false-positives.
  • DOSPageInterval: Number of seconds for DOSPageCount. By default, this is set to 1 second. That means that if you don’t change it, requesting 2 pages in 1 second will temporarily blacklist an IP address.
  • DOSSiteInterval: Similar to DOSPageInterval, this option specifies the number of seconds that DOSSiteCount monitors. By default, this is set to 1 second. That means that if a single IP address requests 50 resources on the same website in a single second, it will be temporarily blacklisted.
  • DOSBlockingPeriod: The amount of time an IP address stays on the blacklist. Set to 10 seconds by default, you can change this to any value you like. Increase this value to keep blocked IP addresses in time-out for a more extended period.
  • DOSLogDir: By default, this is set to write logs to /var/log/mod_evasive. These logs can be reviewed later to evaluate client behavior.

You can create a new directory to save these apache access logs – make sure you change the owner to Apache, then update the location in this entry:

sudo mkdir /var/log/apache/mod_evasive
sudo chown -R apache:apache /var/log/apache/mod_evasive
sudo nano /etc/apache2/mods-enabled/evasive.conf
DOSLogDir "/var/log/apache/mod_evasive"

Whitelisting IP addresses: This option isn’t included in the evasive.conf file by default.

Open the file again for editing, then add the following line:


DOSWhitelist 192.168.0.*

Substitute the IP address with the one you want to whitelist. Also, you should list only one entry per line. This is typically used with a trusted client that exchanges a lot of data with your website.

This tool is good at detecting bots and scripts. If there are bots or scripts that you want to allow, you can whitelist them to prevent these bots and scripts from triggering a blacklist action.

Make sure to save the file and exit. Then, reload your Apache service before testing any of these options.


Now you know how to install and configure mod_evasive on Apache.

Between its simplicity to configure and its effectiveness, it has become a favorite tool for protecting Apache and Linux systems. For more information and the manual, please refer to the developer’s GitHub documentation page.

Was this article helpful?
Goran Jevtic
Goran combines his leadership skills and passion for research, writing, and technology as a Technical Writing Team Lead at phoenixNAP. Working with multiple departments and on various projects, he has developed an extraordinary understanding of cloud and virtualization technology trends and best practices.
Next you should read
How to Setup and Enable Automatic Security Updates on Ubuntu
March 7, 2024

If you do not keep your Ubuntu operating system up-to-date, you run the risk of compromising overall system...
Read more
How to Disable or Turn Off SELinux on CentOS 7
April 29, 2019

SELinux is a mandatory access control (MAC) enforcer built into the Linux kernel. It limits the privileges of...
Read more
How to Set up & Configure ModSecurity on Apache
March 11, 2019

ModSecurity is an Open-source firewall application for Apache. Learn how to Setup & Configure ModSecurity on...
Read more
How to View Apache Access & Error Logs
February 28, 2024

Apache is part of the LAMP stack of software for Linux (Linux, Apache, MySQL, PHP). Apache is responsible for...
Read more