How to Use the locate Command in Linux

January 25, 2022


The locate command is a Unix utility used for quickly finding files and directories. The command is a more convenient and efficient alternative to the find command, which is more aggressive and takes longer to complete the search.

Opposite to find, the locate command doesn't search the entire filesystem, but looks through a regularly updated file database in the system. Thus, the search completes much faster.

In this tutorial, you will learn to install and use the locate command in Linux.

How to use the locate command in Linux.


  • A system running Linux.
  • An account with administrator privileges.

How to Install locate

Depending on which Linux distribution you are using, the locate package may not be pre-installed.

To check if locate is installed, enter:


If locate is installed on your distribution, the command prints the following output:

Locate is installed on the system.

For this tutorial, we have used Ubuntu 20.04, which doesn't come with the locate utility pre-installed. In this case, the output message is:

Checking if locate is installed on Linux.

Install locate on Ubuntu and Debian

Follow the steps below to install locate on Ubuntu or Debian:

1. Update the package repository:

sudo apt update 

2. Install the locate package by running:

sudo apt install mlocate

Install locate on CentOS and Fedora

Follow the steps below to install locate on CentOS or Fedora:

1. Update the package repository:

sudo yum -y update

2. Run the following command to install locate:

sudo yum install mlocate

Note: Installing the mlocate package creates a cron job that runs the updatedb command every 24 hours and updates the database. To manually update the database, use sudo updatedb.

How to Use the locate Command in Linux With Examples

The locate command finds files in Linux using the file name. locate is used for obtaining instantaneous results, and it is an essential utility when speed is a priority.

The command performs the search using a database containing bits of files with the corresponding paths in the system. However, locate doesn't check for files outside the database, which means it doesn't report about files created after the most recent database update.

The syntax for the locate command is:

locate [options] [pattern]

Some useful options are:

-A, --allDisplays only the entries matching all the specified pattern(s).
-b, --basenameMatches only the base name against the specified patterns.
-c, --countOutputs the number of matching entries instead of the file names.
-d, --database [DBPATH]Replaces the default database with [DBPATH] - a colon-separated list of database file names.
-e, --existingOnly displays entries for existing files.
-L, --followUse to check whether files exist if the --existing option is specified. The --follow option omits broken symbolic links.
-i, --ignore-caseIgnores pattern case sensitivity.
-p, --ignore-spacesIgnores punctuation and spaces when matching patterns.
-t, --transliterateUses iconv transliteration to ignore accents and diacritics when matching patterns.
-l, --limit, -n [LIMIT]Use to exit successfully after finding a [LIMIT] number of entries.
-0, --nullSeparates output entries using the ASCII NUL character instead of printing each entry in a new line.
-S, --statisticsPrints the statistics about each read database to standard output instead of searching for files.
-q, --quietHides any errors encountered while reading and processing databases.
-r, --regexp [REGEXP]Used for searching a basic regular expression [REGEXP]. Specifying this option doesn't allow [pattern] arguments.
-w, --wholenameMatches only the whole path name against the specified patterns.
-h, --helpDisplays the help file with a list of all available options.

The following sections list helpful examples of using the locate command.

Search for a File

The simplest way to use the locate command is to input the pattern you want to search for.

For example, search for all files containing the mysql pattern in the filename by running the following command:

locate mysql
Searching for a file in Linux.

The output lists all the absolute paths for the files containing the mysql pattern in the filename.

Format the Output

When the search result is a long list of files, pipe the locate command into less for better readability and easier scrolling.

For example:

locate mysql | less
Piping the locate output into a terminal pager.

Navigate the output by pressing the Space bar to move forward, b to reverse, or Q to quit.

Show the Existing Files

While the locate command retrieves results almost instantaneously, the speed comes with a cost. Sometimes deleted files appear in the results because the database that locate reads hasn't been updated since the files were deleted. Also, new files don't appear in the results if they were created after the last database update.

Eliminate these shortcomings using the -e option to search the filesystem and include only the existing files in the results.

For instance:

Showing only existing files in locate.

In the example above, we first deleted a file using rm. Searching for the file with locate shows the deleted file's location. However, when using the -e option, locate shows no results since the file was removed.

Note: To permanently delete a file and prevent its recovery, use the shred command.

Count the Existing Files

Print the number of matched files instead of the file names and their absolute paths by specifying the -c option.

For example:

locate -c mysql
Count the number of files instead of showing file paths in locate.

The output contains only the number of files containing the mysql string in the filename. All other information is suppressed.

Disable Errors While Searching

The -q option instructs locate to suppress any errors that might show up while reading a database.

In the following example, locate uses a different database to perform the search. The command first reports that the database doesn't exist.

However, specifying the -q option suppresses the error:

Suppressing errors when searching with locate.

Limit the Number of Search Results

Limit the number of search results with the -n option to avoid redundant results. For example, limit the search to only ten results by entering:

locate *.txt -n 10
Limiting the number of search results.

The output shows only the first ten files matching the search pattern.

Ignore Case Sensitive Files

By default, locate performs a case-sensitive search when processing the input query. Instruct locate to ignore case sensitivity using the -i option.

In the following example, we first searched for example_file in lowercase, and locate showed no output because the filename contains uppercase letters.

Searching for the file in uppercase shows the file's location:

Searching with case-sensitivity on.

Performing the same search in lowercase and specifying the -i option ignores case-sensitivity and shows the file in the output:

Ignoring case-sensitivity while searching.

Search for a File with an Exact Name

By default, locate parses the input pattern as a string and shows all files containing the input pattern within the filename. For example, searching for mysql shows all files containing the mysql string as part of the filename, instead of files whose entire filename is mysql.

Search for a file with an exact name using the -r (regular expression) option.

For example:

Searching using regular expressions.

The output shows only the files whose filename completely matches the input pattern.

Note: The dollar sign ($) at the end of a regular expression marks the end of a line. The forward slash character (/) denotes regular expression boundaries.

Separate Output Entries with ASCII NUL

The output entries that locate produces are separated by a newline (\n) character. Use the -0 option to separate entries with ASCII NUL instead of the newline character.

For example:

locate -0 apache
Replacing the locate output entries with ASCII NUL instead of a newline character.

The default separator is no longer the newline character, and the entries are separated with ASCII NUL.

View Database Statistics

The locate command allows you to see various database statistics, including the number of directories and files stored in the database. To display database statistics, specify the -S option:

locate -S
Showing locate database statistics.

The output states which database locate is currently using, the number of directories and files, and the database size in bytes.

Note: Learn everything about databases in our comprehensive article on databases and database systems.

Update locate Database

The database that locate uses automatically updates daily at the same time. To update the database manually and make sure the file index is correct, run the following command:

sudo updatedb

The update process takes a few seconds to complete, depending on the number of files on the system.

Choose a Different mlocate Database

Instruct locate to use a database other than the default one by specifying the -d option. The feature is helpful when looking for results not present in the default mlocate database.

To specify a different database, use the following syntax:

locate -d [new database path] [pattern]

Ignore Diacritics and Accent Differences

The locate command uses ordinary letters for result matching, which means that filenames containing letters with diacritics do not appear in the search results. Use the -t option to instruct locate to ignore such differences between letters and include diacritics in the results.

For example:

Ignoring accents and diacritical marks in locate searches.

Searching for the nice-cafe pattern shows no results in the example above because the filename contains a diacritical mark. Searching for the same pattern again and specifying the -t option shows the nice-café file path as a result, ignoring the diacritic in the filename.


This guide showed how to use the locate command to quickly search for files in a filesystem. While the utility has its drawbacks, the utility is an excellent solution for finding files when speed is a priority.

For other useful Linux commands, check out our comprehensive Linux commands cheat sheet with a downloadable PDF document.

Was this article helpful?
Bosko Marijan
Having worked as an educator and content writer, combined with his lifelong passion for all things high-tech, Bosko strives to simplify intricate concepts and make them user-friendly. That has led him to technical writing at PhoenixNAP, where he continues his mission of spreading knowledge.
Next you should read
How to Use the nslookup Command
January 13, 2022

This tutorial will introduce nslookup, a cross-platform command for querying servers and obtaining domain records.
Read more
How to Use the dmesg Linux Command
January 18, 2022

The dmesg utility allows you to inspect the kernel ring buffer and check for errors during system startup. This tutorial shows how to use the dmesg command.
Read more
How to Use the Linux head Command
January 5, 2022

The head command lists the first ten lines of a file in standard output. Learn how to use the head command and its options (with examples).
Read more
Using the Linux free Command
December 29, 2021

The free command in Linux is a utility that helps monitor RAM usage on a system. This guide shows how to use the free command and determine if there are enough resources for running new apps.
Read more